Start | TelehealthSleep.com

Welcome To Your Home Sleep Test!

Step 1

Enter your phone number to get your Patient ID:

Your Patient ID is:

-----

Your Sleep Test Status:

-----

Step 2

Download the "SleepImage" app from the app store. Click on your device type below to download:

iPhone

Android

Step 3

Put the ring on your finger to activate it and check that the ring is displaying blue text on the screen. If it is, proceed to Step 4

Screen Shot 2022-04-05 at 11.54.05 AM.png

If there is no blue text, it means the battery is low, so please use the charging cable provided in the box to charge the ring, and continue in 1 hour

Step 4

Open the SleepImage app, and enter your Patient ID and Date of Birth to login

Step 5

Click "Connect" to pair the ring with your phone.

Step 6

Once connected, you will see a screen with a green play button. This means setup is complete. Use the charging cable provided to charge the ring. Leave it to charge until you are ready to sleep. When you are ready to sleep, put the ring on either your thumb or index finger and press the green play button on the phone app to start your sleep test. The recommended duration for the sleep test is 7-9 hours to ensure there is sufficient data for analysis.

Step 7

When you wake up in the morning. Press the red stop button on the phone app which will automatically upload your sleep test data. It usually takes about 4 hours for the data to be uploaded to the system.

Step 8

Check the status of your sleep test at the top of this page using your phone number. You will see whether the duration of your test is sufficient, or you will need to repeat the test until we have enough data for the analysis.

Step 9

Once sufficient data has been collected, place the ring AND charging cable in the clear bubble wrap and place back in the priority mail box which already has the return label on it. Drop off at your local post office, or schedule a FREE pick-up by USPS:

Schedule FREE Pick-Up

1-877-929-2757

Welcome To Your Home Sleep Test!

Step 1

Enter your phone number to get your Patient ID:

Your Patient ID is:

-----

Your Sleep Test Status:

-----

Step 2

Download the "SleepImage" app from the app store. Click on your device type below to download:

Step 3

Put the ring on your finger to activate it and check that the ring is displaying blue text on the screen. If it is, proceed to Step 4

If there is no blue text, it means the battery is low, so please use the charging cable provided in the box to charge the ring, and continue in 1 hour

Step 4

Open the SleepImage app, and enter your Patient ID and Date of Birth to login

Step 5

Click "Connect" to pair the ring with your phone.

Step 6

Step 7

When you wake up in the morning. Press the red stop button on the phone app which will automatically upload your sleep test data. It usually takes about 4 hours for the data to be uploaded to the system.

Step 8

Check the status of your sleep test at the top of this page using your phone number. You will see whether the duration of your test is sufficient, or you will need to repeat the test until we have enough data for the analysis.

Step 9

Once sufficient data has been collected, place the ring AND charging cable in the clear bubble wrap and place back in the priority mail box which already has the return label on it. Drop off at your local post office, or schedule a FREE pick-up by USPS:

Step 10

Once we receive the equipment back (ring & cable), we will release the report which has been analyzed by a board-cetified sleep specialist.